This Sunseeker  has bad oxidation on the stern which has been caused by UV.

THE PROCESS

First the stern had to be flat sanded with several different grades of sandpaper and finished with 1300 to remove the oxidation deep in the gelcoat. We then used 3M Imperial compound to remove the scratch marks made by the sandpaper.

We then move onto the P1 Nano Polish this will remove any marks left in the gelcoat and will bring the gelcoat back to a fabulous shine. The next stage is the P2 polish this will completely remove any holograms that might be left in the gelcoat.

The C1 Crystal Lacquer is then applied and this chemically bonds to the gelcoat and becomes the new surface layer of the gelcoat. This gives unrivaled UV resistance, Dirt repellency, Easy clean and High Gloss